Mi-Glow® 800 fluorescent yellow-green particles premixed with liquid Wetting Agent 483 for use in water media. This advanced formulation allows for superior corrosion protection, wetting, particle mobility, and increased shelf life. It is designed to be used with UV-A light to detect very fine discontinuities in finished products. This material is used to find fine discontinuities such as tears, nonmetallic inclusions, shrinkage, laps, and seams located on the surface or near surface. One case of Mi-Glow® 783 is packaged with three quarts of concentrate and one quart of defoamer. Wetting Agent 483 is a borate-free concentrated liquid wetting agent with no water or defoamer added (see below for the addition of the defoamer).
ITEM # / PACKAGE SIZE
#3585 – 4 – 1 quart bottles/case (Borate Free)
Particle Color: Fluorescent Yellow-Green
Specific Gravity: 1.1 g/ml - for the concentrate
Particle Size: Not less than 98% passage through US Standard No. 325 (45 μm) sieve as defined in AMS 3044. The typical range of particle sizes is from 2 to 5 μm, with an average particle size of 3 μm.
Sensitivity: Mi-Glow® 783 shows a minimum of 8 lines on an AISI 01 Ketos tool steel ring (as defined in SAE AS5282), set on a 1-inch diameter copper bar, magnetized with 2500 A of direct current.
Particle Certification: Particles meet or exceed all relevant industry specifications, including but not limited to ASTM E 1444, AMS 3044, MIL-STD-271, NAVSEA 250-1500-1, NTR-1E. Certification is included with each shipment.
Temperature Limits: 32-120°F (0-49°C)
Shelf Life: Two (2) year, when sealed bottles are not subjected to extreme heat or cold. A Certificate of Shelf Life is available upon request.